Manual Setting of the Clock
1. During Standby mode, press and hold MENU/PRESET/CLOCK button on the unit.
‘24HR’ will ash on the display.
2. Press
to select ‘24Hour’ or ‘12Hour’, then press MENU/PRESET/CLOCK button.
3. Press
to set the hours, then press MENU/PRESET/CLOCK button.
4. Press
to set the minutes, then press MENU/PRESET/CLOCK button.
5. The time is now set.
Setting the Alarm Timer
1. Make sure that the unit is in STANDBY mode.
1. Press and hold TIMER until the display shows ‘Timer On’, and the hour digits ash.
2. Press
to set the hours, then press TIMER.
3. Press
to set the minutes, then press TIMER.
4. When On Timer Clock is set, the display will show ‘Timer O’ and the hour digits will
ash.
5. Press
to set the hours, then press TIMER.
6. Press
to set the minutes, then press TIMER.
7. Finally press
to select DAB, FM, TAPE, CD or USB mode, then press TIMER.
8. Press
to adjust the Timer volume, and then press TIMER to conrm.
9. “
” icon will show on the display to indicator the timer is on.
10. The Timer setting is now complete.
• If you select FM/DAB mode make sure you have selected the radio station you want to be woken up
to rst.
• If you have selected TAPE mode, make sure that you have a cassette tape in the unit.
• If you have selected CD mode make sure you have a CD inserted into the CD tray, if you forget to insert
a CD, the radio will switch on instead.
• If you have selected USB mode, make sure that you have connected your USB device with the unit.
To Deactivate the Alarm Timer
Press TIMER on the unit repeatedly to select Timer O mode. The “ ” indicator will
disappear from the display.
• If no buttons are pressed for 5 seconds the unit will exit clock setting mode.
• If your unit is disconnected from the mains supply the clock setting will be lost.
If you cannot receive any DAB signal, you can manually set the time. Once DAB signal is received, the time
will be automatically updated.
14
RC-D327B_IB_Final190408V4.indd 14 09/04/2019 12:24
To Next Page
Loading...
