JVC RC-D327B - CD;MP3 Operation; Playback; To Pause Playback; To Stop Playback

CD/MP3 Operation
Press the SOURCE button repeatedly to select CD mode.
Playback
1. Press the OPEN/CLOSE button at the top of the unit and the disc tray will open
automatically.
2. Place the CD/MP3 disc with the label side up into the CD compartment, and then press
OPEN/CLOSE
to close the door.
3. If there is no disc or the disc can’t be read, ‘No Disc’ will show on the display.
4. The total number of tracks will display on the display, then press SCAN/
to play the
rst track of the CD/MP3 disc automatically.
To Pause Playback
1. Press SCAN/ to pause the playback. ‘PAUSE’ will show on the display.
2. To resume playback, press
again.
To Stop Playback
Press /ENTER to stop playback.
Skipping to Another Track
• Press to skip to beginning of the current track or the previous track.
• Press
to skip forward to the next track.
Fast Forward and Fast Reverse
• Press the buttons to fast backward or forward on the current track.
• To resume playback, release the
buttons.
Selecting an Album (MP3)
Press FOLDER/RECALL to select an album when playing an MP3 CD.
• CD-ROM, CD-I, CDV, VCD, DVD or computer CDs are not possible for playback.
• CDs encoded with copyright protection technologies by some record companies may be unplayable
by this unit.
20
RC-D327B_IB_Final190408V4.indd 20 09/04/2019 12:24