JVC RC-X3 - Specifications

RC-X3 B/E/G |
Features
1. Portable system incorporating multi-function CD player.
¢ CD player with program play of up to 20 tunes/repeat
play/random play/intro play function.
* Digital LCD (Liquid Crystal Display) indicates the
playback time of each tune and the number and total
playback time of programmed tunes.
¢ 8-cm (3-3/16'’) ‘’CD singles’’ capability.
2. Synchro-record start for CD recording convenience.
3. Double-cassette mechanism (Deck A for recording and
playback, Deck B for playback).
¢ Metal and CrO2 tape can be played back, for superior
tone quality.
Specifications
Compact disc player section
Type
Signal detection
system
Number of channels
Frequency response
Signal-to-noise ratio
Wow & flutter
Radio section
Frequency ranges
Antennas
Tape deck section
Track system
Motor
Heads
Frequency response
Signal-to-noise ratio
Wow & flutter
Fast wind time
(No. 1755)
: Compact disc player
: Non-contact optical pickup
(semiconductor laser)
: 2 channels (stereo)
: 20 Hz~ 20,000 Hz
: 76 dB
: Less than measurable limit
>FM 88—108 MHz
SW 6—18 MHz
MW 540—1600 kHz
LW 150—350 kHz (B/E)
150—280 kHz (G)
: Telescopic antenna for FM &
SW Ferrite core antenna for
MW & LW
: 4-track 2-channel stereo
: Electronic governor DC motor
for capstan
: Deck A; Hard permalloy head
for recording/playback, 2 gap
ferrite head for erasure
Deck B; Hard permalloy head for
playback
: 60 Hz— 14,000 Hz
(with normal tape)
: 49 dB (weighted, at 1 kHz)
: 0.11% (WRMS)
: Approx. 120 sec (C-60
cassette)
e Synchro start dubbing function (normal/high speed
dubbing).
e Relay playback (from Deck B to Deck A).
¢ Microphone mixing facility during tape playback.
¢ Full auto-stop mechanism.
. Automatic level loudness control.
¢ Dynamic sound reproduction of low level sound.
® Clear sound reproduction with less distortion at high
outputs.
. CD OUT jacks.
General
Speakers
Input terminal
Output terminals
DIN socket
(RC-X3 G)
Power output
Power sources
(RC-X3 E only)
Power consumption
Dimensions
Weight
Accessory provided
: 12 cm (4-3/4’’) full range x 2
(3 Q)
: MIC x 1 (Min. Input level: 3 mV
(—50 dBv)
Matching impedance:
200 2—2 kQ)
: CD OUT x 2
(1.0 V/4.3 kQ)
PHONES x 1
(Output level: O—40 mW/32 Q,
Matching impedance:
8 2—1 kQ)
: Min. input level; 0.6 mV/kQ
Input impedance; 9 kQ
Output level; 500 mV
Output impedance; 6 k2
:16W (8 W+8 W) at 3 Q (Max.)
10 W (5W+5W) at 32 (10%
THD)
: AC 220—240 V/110—120V,
50/60 Hz
DC 12 V (‘’R20”' cells x 8)
> Ext. DC IN12 V
(car battery via optional CN-332
car adapter)
: 27 watts
: 591(W) x 181(H) x 228(D) mm
: Approx. 4.9 kg
without batteries
: AC power cord
Design and specifications are subject to change without
notice.