Tuner
You can always use the following buttons:
FM/AM Alternate between FM and AM.
After pressing FM/AM, you can use the following buttons for
the tuner operations:
1 - 10, +10 Select a preset channel number directly.
• For channel number 5, press 5.
• For channel number 15, press +10, then 5.
• For channel number 20, press +10, then 10.
FM MODE Change the FM reception mode.
Cassette deck
After pressing TAPE/CDR, you can use the following buttons
for the cassette deck operations:
Start playback.
FF Fast wind a tape from left to right.
REW Fast wind a tape from right to left.
• Stop playback or recording.
II Pause playback. To release, press I,-.
REC PAUSE Press this button to enter recording pause.
Press this button then I,- to start recording.
Note:
Before starting the above operations, make sure that you have
changed the source name correctly.See page 12.
34
To Next Page
Loading...
