20
Using the Preset SEA Modes
The preset SEA (Sound Effect Amplifier) modes give you control of the way your music sounds.
Notes:
• The preset SEA modes cannot
be used for recording.
• When you turn on the preset
SEA mode, the mode with its
effect level previously selected
is recalled at first.
PRESET SEA
Selecting Your Favorite SEA Mode
On the front panel:
1. Press PRESET SEA so that the Control
%%
%%
% /
fifi
fifi
fi /
@@
@@
@ /
##
##
# buttons work for preset SEA setting.
The lamp above the button lights up.
2. Press Control
%%
%%
% /
fifi
fifi
fi until the preset SEA mode you
want appears on the display.
The SEA indicator also lights up on the display.
Each time you press the button, the preset SEA modes
change as follows:
3. Press Control
@@
@@
@ /
##
##
# to select the effect level.
Each time you press the button, the effect level changes
as follows:
When “Movie” is selected:
When “Sports” is selected:
When “Music” is selected:
Movie: Adds breadth to sounds so you feel like you are in a movie theater.
Sports: Makes sounds exciting.
Music: Select one of the modes below.
JAZZ: Gives a feeling of a live atmosphere. Good for
acoustic music.
ROCK: Gives a heavy sound. Both high and low frequencies
are boosted.
MUSICAL: Enhances the mid-frequency range, which the human
voice is mostly made up of.
COUNTRY: Enhances the high-frequency range so that
instruments such the violin and banjo are emphasized.
OFF: No preset SEA mode is applied (See below).
To cancel the preset SEA mode
Select “OFF” in step 2 above.
The SEA indicator goes off from the display.
SPORTS1
SPORTS2 SPORTS3
JAZZ 1
JAZZ 2
COUNTRY2 COUNTRY1 MUSICAL2 MUSICAL1
ROCK 1 ROCK 2
MOVIE 1
MOVIE 2 MOVIE 3
Movie Sports Music
OFF
RX-554VBK(J)_0117-001B_En.20-38 98.1.6, 11:36 AM20
To Next Page
Loading...
Need help?
General
