EasyManua.ls Logo

JVC RX-D201S - AV Receiver - Connecting Video Components

JVC RX-D201S - AV Receiver
47 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
NOTES
Select the analogue input mode. See “Selecting the analogue or
digital input mode” on page 12.
When the TV is equipped with multiple SCART terminals, refer
to the TV manual to check the available video signals for each
terminal, then connect the SCART cable correctly.
SCART connection
You can enjoy pictures and sounds from playback components
simply by connecting with the SCART cable.
If your video components have digital output terminal, also
connect them using the digital terminals explained in “Digital
connection” (see page 10).
CAUTION:
If you connect a sound-enhancing device such as a graphic
equalizer between the source components and this receiver, the
sound output through this receiver may be distorted.
SCART Terminal Specifications
Terminal name
TV VCR DVR/DVD
Audio L/R
Input
Composite
Video
S-video (Y/C)
RGB
Audio L/R
Output
Composite *1*2 *1*2 *1*2
Video
S-video (Y/C)
*2 −−
RGB *2 −−
T-V LINK *3 *3 *3
*1 The signals input from a SCART terminal cannot be output
through the same SCART terminal.
*2 The video format of the output video signals are consistent
with that of the input video signals. For example, if S-video
signals are input to this receiver, no signals other than S-
video signals can be output from this receiver.
Refer to the manuals supplied with the video components to
check the setting of the input/output video signals.
*3 The signals for the T-V LINK function are always going
through the receiver.
: Available, –: Not available
DO NOT use a TV through a VCR or a TV with a built-in
VCR; otherwise, the picture may be distorted.
Turn off all components before making connections.
Illustrations of the input/output terminals are typical
examples. When you connect other components, refer also
to their manuals since the terminal names actually printed on
the rear vary among different components.
CONTINUED ON THE NEXT PAGE
TV
VCR
DVD recorder or
DVD player
SCART cable
(not supplied)
Connecting video components
Do not connect the AC power plug to the wall outlet until all connections are completed.
06-08RX-D201S[B]_f.p65 05.5.25, 11:07 AM7

Table of Contents

Related product manuals