JVC TD-X321 - Removal of Main Parts

TD-X321
*",c,e,eu,u
I
tr
Removal
of Main
Parts
1.
Top
cover
@
Remove
six screws
@,
@
retaining
the
top
cover.
2.
Bottom
"or"r
@
Remove
six
screws
@
retaining
the
bottom
cover.
3. Front
panet
@
(1)
Remove
one
screw
@
retaining
the
mechanism
and
main P.C.
board.
(2)
Remove
four
screws
@
retaining
the front
panet.
(No.
a3o5)
(3)
Remove
one
s"rew@ retaining
the
gear
@
and
take
out
the
gear.
(4)
Take
out
the
cassette
ggor
@.
(5)
Remove
two
screws (p
retaining the bottom
side
of
front
panel.
(6)
Remove
two
screws
@
retaining the
mechanism
and
take out
the
mechanism.
(7)
Pull
out the
8-pin connector
(CN801)
from
the
main
P.C.
board.
12