41
Setting reverts back to default setting.
When the [SET] button is pressed, AFACTORY SETTINGS...B will be displayed for about 20 seconds. Then settings will revert
back to default settings.
After this is complete, ADATA CLEARDB will be displayed.
(● indicates the default value)
Item Setting value Functions and settings
W.BALANCE ● ATW-W
ATW- N
AWC
This item sets the white balance adjustment function. You can adjust the
illumination within the color temperature range of 2,300K to 10,000K.
ATW-N :This is the Auto-Tracking White Balance mode. (Automatic color
temperature tracking). The camera adjusts the white balance
automatically according to the color temperature of the illumination.
(Color temperature range of 3,200K to 8,000K)
ATW-W :This mode supports an even wider range of color temperature than
AATW- NB. (Color temperature range of 2,300K to 10,000K)
AWC :This is the Auto White Control (automatic white balance adjustment)
mode. A<SET>AWC EXECB will be displayed. Press the [SET] button
to activate AWC and adjust white balance.
Memo ：
●
When set to
A
AT W- N
B
,
A
AT W- W
B
, [R GAIN] and [B GAIN] are displayed as
A
- - -
B
. Hue cannot be adjusted.
●
If [B&W MODE] under [CAMERA ALC] item is set to
A
B&W
B
, [W.BALANCE], [R
GAIN], [B GAIN] items are displayed as
A
- - -
B
. Hue cannot be adjusted.
R GAIN
0 to 255
(● 76)
Adjusts the R (red) hue during AWC.
The larger the number, the redder the color becomes.
B GAIN
0 to 255
(● 71)
Adjusts the B (blue) hue during AWC.
The larger the number, the bluer the color becomes.
FACTORY SETTINGS
screen
Item Setting value Functions and settings
CANCEL ^ Does not return to the default setting. Press the [MENU] button or [SET] button
to return to the menu screen.
CLEAR(W/O POS.TITLE) ^ Setting reverts back to default setting. However, setting data and titles for each
setting position and position will not return to the default setting. The screen
returns to the menu screen after the operation is completed.
CLEAR(ALL) ^ Returns all settings to default setting, including the titles and setting positions.
The screen returns to the menu screen after the operation is completed.
TK-C686E_EN.book Page 41 Tuesday, December 4, 2007 4:45 PM
To Next Page
Loading...
Need help?
General
