z
0
u,
---J
<J)
<J)
12
I BASIC CONNECTION EXAMPLE
• Before connecting your system, make sure that all units are turned off.
• The illustration below shows some examples of different connections. Termina l connections may differ depending on the component connected.
Be sure to refer to the instructions provided with the unit(s) you are connecting. ·
• Each pair of input (IN) and output (OUT) terminals are bridge-connected.
• If you're not connecting any equipment to a bridged output (OUT) terminal, be sure not to connect any other cables to the bridged output (OUT)
terminal as this will cause the terminating resistance switch to open (auto terminate function).
• When making a bridge connection, connect the input (IN) and output (OUT) terminals on the monitor to separate video components.
(For example, if both terminals are connected to the same VCR, resonance may occur except during playback. This is caused by the same video
signal "looping" between the VCRs, and is not a malfunction.)
• Select the video input (INPUT A (VIDEO) or INPUT B (VIDEO /Y/C)) with the INPUT SELECT buttons on the front panel. When both VIDEO B
terminals are connected (input) at the same time, the Y/C terminal is given priority.
• The ASPECT RATIO or INPUT NB settings can be controlled via the REMOTE terminal by setting ASPECT REMOTE or INPUT REMOTE in the
<SET-UP MENU> screen to valid. (Refer to pages 9 and 10.)
■
VIDEO A Connection Example (Select Input A (VIDEO))
Video Camera
Video Monitor
Audio -.
(AudlosignalcableJ
VCR
■
VIDEO B (VIDEO) Connection
Example (Select Input B (VIDEO))
~
Video Camera
Video-.
(Vldeoalgtl81cabfe)
□
Video Monitor
Audio....,
(Audio&iQnalcable)
VCR
External control switch
External control switch
External control >---~----<
functions Open circuit Closed circuit
(open) (short)
INPUT AIB INPUT A INPUT B
I
REMOTE -
1 IR&motecable)
- - - - - - - -- - - - - -·
Video -.
(Vid&osignalcable)
Video -.
(Videosignelcable)
Audio.-....
(Audio signal cable)
1--~[<l'>------.-,,.-..i
.- REMOTE
(RemolecableJ
-. : Signal Flow
1=~
VCR
□
Video Monitor
VCR
□
Video Monitor
External control switch
RCA pin
closedcircuit{short)
External control switch I
functions
External control I
Open circuit 1Closedcircui1
I open) (short)
ASPECT RATIO 4--3 (4:3) I 16-9 (16:9) :
--------------
■
VIDEO B (Y/C) Connection Example (Select Input B (Y/C))
~
Video Camera
□
Y/C (S-video) -
/Y/C(S-video)slgflalcable)
Video Monitor
Audio......_
(Audio signal cable)
~o~
IN
~
OUT
~o~ '
l~~~UT
]i7E
1-------------,,....,"""'
VCR
Y/C (S-video) -
(Y/C(S-video}slgna lcable)
□
Audio ....,
Video Monitor
(Audiosignalcable)
External control switch
(Remote cable)
closedcircuit(short)
External control swttch I
External control
functions Open circuit !Closed circuit I
(open) (short) I
: Signal Flow ASPECT RATIO 4-3 (4:3) I 1s-9 (16:9) :
---- ----------
I
13
To Next Page
Loading...
Need help?
General