JVC UX-G950VB

1-18 (No.MB682<Rev.001>)
SECTION 4
ADJUSTMENT
4.1 ATTENTION IN SERVICE OF DVD SECTION
(1) When pickup, Flash ROM ,DVD module board were changed, initialize EEPROM by all means.
(2) When full initialization was excuted, excute learning with a DVD test disc by all means.
Test disc : VT-501, VT-502
Learning method : It is adjusted automatically by normal playback of a DVD disc.
4.2 DVD/CD TEST MODE
CAUTION:
The operation please use the button of the main body.
(1) Press "DVD/CD" key + "STOP" key on panel, then AC in.
(2) FL display "T **# $&"
** is Destination
# is Region Code
$ is Learning Condition
& is Initialize Condition
(3) Press "MENU/PL" key repeatedly, until FL display "CHECK"
(4) Press number key on Remote Control "1-10, 0 and >=10"
Key 1 : "PLAYBACK"
Key 2 : "WOBBLE"
Key 3 : "TNO-1 SR"
Key 4 : "CDLD LSR"
Key 5 : "DVDLDLSR"
Key 6 : " JITX1 "
Key 7 : "EEP BWD"
Key 8 : "EEP FWD"
Key 9 : " TEMP "
Key 10 : " DVD-DL "
Key 0 : " MONITOR "
Key >=10 : " INIT "