JVC UX-P550 Service Manual

1-36 (No.MB286)
2 3
Press the "0" key on the remote controller.
Press the "7" key on the remote controller.
Confirming the EEPROM (MECHA) content
in -1 address step
Press the "8" key on the remote controller.
Press the "9" key on the remote controller.
Performing the TEMPERATURE SENSOR VALUE
Press the "10" key on the remote controller.
Performing SEARCH DVD_DL PARALLEL DISC
DESIGNATED POSITION
and JITTER MEASUREMENT
FL indication
FL indication
cccc j j j j
(2 seconds)
EEP BWD
Confirming the EEPROM (MECHA) content
in +1 address step
FL indication
FL indication
cccc j j j j
(2 seconds)
EEP FWD
FL indication
FL indication
cccc j j j j
(2 seconds)
TEMP
FL indication
FL indication
cccc j j j j
(2 seconds)
DVD-DL
Performing of monitor output
FL indication
FL indication
cccc j j j j
(2 seconds)
MONITOR
4 5
Press the "+10" key on the remote controller.
INITIALIZE EEPROM (MECHA)
FL indication
INIT
7
6

JVC UX-P550 Specifications

General

Brand	JVC
Model	UX-P550
Category	Stereo System
Language	English