JVC XL-F115TN - Various Playback Patterns; Playing Tracks in a Order of Track;Disc Number; Playing Tracks Ina Desired Order

Playing tracks in a order
of track/disc number
You can continuously play all the loaded discs, starting from any
track on any disc.
> PLAY/
PLAY MODE Kew/eri ut PAUSE
DISC Track butions
1. Press the PLAY MODE button on the main unit or the CON-
TINUE button on the remote controt unit so that both the
PROGRAM and RANDOM indicators are turned off on the
display.
When you want to play from a desired disc or track, go to step 3.
N
Press the » PLAY/ts PAUSE button on the main unit or the >
button on the remote control unit to start playback.
Playback starts from the previously selected disc.
If the disc tray is not closed, pressing the » PLAY/1 PAUSE button
closes the disc tray and then starts playback.
The following display appears.
Track number being played.
ayayaya]
‘a iC) ADO f
Shows the disc number being played.
oe
Use the DISC button to select the disc number which contains
the first track to be played.
When you want to play from the first track on the selected disc, it
is not necessary to select the track number.
>
Select the track number with the «</>» buttons or, for XL-
F215TN, the track buttons.
The selected track number appears on the display and playback
starts from the selected track automatically.
VARIOUS PLAYBACK PATTERNS _
ad
as
om
XL-F115TN/XL-F116BK
XL-F215TN/XL-F216BK
Playing tracks ina
desired order
You can play only the favorite tracks in any desired order.
m» PLAY/
PLAY MODE STOP/CANCEL 1 PAUSE
Track buttons
1. 1n stop mode, press the PLAY MODE button on the main unit
or the PROGRAM button on the remote control unit so that the
PROGRAM indicator lights on the display.
Select the disc which contains the track to be programmed
with the DISC button.
“AL” (ail tracks) appears on the display.
To program the entire disc
Skip step 3 below. When the track number is not specified after
selecting the disc number, all tracks on the selected disc are
programmed.
For XL-F215TN, select the track number by pressing the track
buttons. For XL-F115TN, select the track number by pressing
the «</> SEARCH button and then the MEMORY button.
Refer to “Specifying a desired track” on page 9 for entering the
track number. For XL-F115TN, press the MEMORY button with the
desired track number shown on the display.
When the selected track number is programmed, the following
display appears.
Display shows the disc
FROGRAW number and the track
El Q | oe cay i) number selected for step 1.
5 o |
ee) i
e if you want to cancel the displayed program step, press the m™
STOP/CANCEL button on the main unit or the CANCEL button on
the remote control unit and then enter the new disc number and/
or track number.
4. Repeat steps 2 and 3 for other tracks and/or discs to be
programmed.
You can program up to 32 steps.
Start playback by pressing the » PLAY/1i PAUSE button on the
main unit or the » button on the remote control unit.
The programmed tracks and/or discs are played in the pro-
grammed order.
e You can skip to a desired program step with the K</>t button.
@ When the DISC SKIP button is pressed during program play, the
playback skips to the next programmed disc.
Page 10
(No. 20485) 1-13