JVC XL-F115TN User Manual

XL-F115TN/XL-F116BK
XL-F215TN/XL-F216BK
VARIOUS PLAYBACK PATTERNS
To check the program contents
Press
the
CALL
button
during
stop
mode.
Each
time
the
CALL
button
is
pressed,
the
program
contents
are
displayed
in
the
programmed
order,
@
When
the
unitis
in
program
play
mode,
press
the
a
button
to
enter
stop
mode
and
then
operate
the
CALL
button.
To modify the program contents
Press
the
CALL
button
until
the
display
shows
the
program
step
to
be
corrected.
Enter
the
new
disc
number
and/or
track
number
referring
to steps 2 and 3 above.
To
delete
a
program
step,
press
the
CALL
button
until
the
display
shows
the
program
step
to
be
deleted
and
then
press
the
m
STOP/
CANCEL
button
on
the
main
unit
or
the
CANCEL
button
on
the
remote
control
unit.
You
can
also
delete
a
displayed
program
step
during
programming.
@
When
the
unit
is
in
program
play
mode,
press
the
m
button
to
enter
stop
mode
and
then
delete
the
program
step.
To
add
discs/tracks
to
the
program
during
program
play-
back
Specify
the
disc
number
by
pressing
the
DISC
button
and,
with
XL-
F215TN, the track number by pressing the track buttons.
The
specified
disc/track
is
added
to
the
end
of
the
programm
being
played back.
@
For
XL-F115TN,
only
the
disc
number
can
be
specified
and
the
entire
disc
is
added
to
the
program.
For
this
operation,
it
is
not
possible
to
utilize
the
«</>»
SEARCH
buttons.
To exit program mode
Press
the
PLAY
MODE
or
RANDOM
button
on
the
main
unit,
or
the
CONTINUE
or
RANDOM
button
on
the
remote
contro!
unit,
and
the
program
mode
is
cancelled.
However,
the
program
contents
are
not
erased
and,
whenever
the
program
mode
is
selected,
you
can
play
the
tracks
in
programmed
order.
To clear the program
In
stop
mode,
press
the
m
STOP/CANCEL
button
on
the
main
unit
repeatedly.
The
program
contents
will
be
cleared
step
by
step.
To
clear
the
entire
program,
press
the
&
OPEN/CLOSE
button
on
the
main
unit
in stop
mode.
The
program
contents
will
be
entirely
cleared,
however,
the
program
mode
is
not
cancelled.
Page 11
1-14 (No. 20485)
Playing tracks ina
random order
You
can
select
and
play
tracks
in
random
order
from
all
the
discs
loaded
in
the
unit.
Selections
are
made
so
that
each
track
is
played
only
once.
RANDOM
>» PLAY/PAUSE
1. in stop mode, press the RANDOM button so that the RANDOM
Indicator lights on the display.
2. Press the > PLAY/U PAUSE button on the main unit or the »
button on the remote control unit to start playback.
e To skip to the track to be played next, press the mi button.
To cancel random playback
In stop mode, press the PLAY MODE button on the main unit or the
CONTINUE or PROGRAM button on the remote control unit. The
RANDOM indicator goes out and the random playback is cancelled.

JVC XL-F115TN Specifications

Power

power requirements	AC 120V ~, 60Hz
power consumption	18 watts

Audio Performance

frequency response	2 Hz to 20, 000 Hz (+1 dB)
dynamic range	More than 98.0 dB (at 1 kHz)
signal to noise ratio	More than 107.0 dB

Weight and Dimensions

dimensions	435 x 128 x 391 mm
weight	11.5 Ibs