12
Advanced Settings
System Update
The Kommander-KA02 power amplifier can be easily
updated in the Advanced Settings view.
1. Connect to the Kommander-KA02 amplifier and access its Azimut
Control Interface;
2. Browse the Main Menu and click on Advanced;
3. Expand the Version Info section: if the amplifier is connected to the
Internet, the device will look for updates on K-array website. When a
new firmware version is available, the Download button lights up.
4. Click on the Download button and wait for the firmware update file to
be saved onboard.
5. When the Install button lights on, click on the Install button to start the
system update.
Do not reboot the amplifier until the alert message appears.
During firmware update, do not modify any parameter of the
device on the web interface.
Update via USB
1. Download the firmware packages from the Support webpage at
www.k-array.com;
2. Format the USB memory stick with FAT16 or FAT32 file system;
3. Create a folder named “update” (case sensitive) in the root of the USB
memory stick;
4. Copy the firmware packages marked as “update” into the update
folder: files must follow the correct naming pattern, and both .package
and .package.sha256 files must be present into the folder:
|-update\
|-rootfs-update-1.0.5.0.package
|-rootfs-update-1.0.5.0.package.sha256
5. Connect the USB memory to the Kommander-KA02 amplifier;
6. Connect to the amplifier and access its Azimut Control Interface;
7. Browse the Main Menu and click on Advanced;
8. Expand the Version Info section;
9. Click on the Install via USB button.
Kommander -KA02
User Guide
To Next Page
Loading...
