11
Local Streaming
Local Streaming
This feature allows a group of Kommander-KA02 amplifiers
to be managed by a single device.
Preliminary setup:
• Connect all the Kommander-KA02 to the same network;
• Set a unique name on each device in order to simplify dectection and
setup (see Advanced Settings, page 12);
• Select one system as Master device on the network: this device will
stream its music to any other Kommander-KA02 marked as Slave.
Local streaming setup:
1. Connect to one Kommander-KA02 amplifier and access its Azimut
Control Interface;
2. Browse the Main Menu and click on Local Streaming: the view
will show the complete list of the systems within the network of the
amplifier you are connected to;
3. For each listed system you can:
• set it as Master: this device will stream the music to any other Slave
amplifier in the network.
WARNING: only one Master device is allowed within the network
• set it as Slave: this device will play back the music streamed by the
Master;
• toggle the Standby mode in order to wake up or turn off the system
(resume or stop playback accordingly);
• set the playback volume.
By accessing the Azimut Control Interface of a Kommander-
KA02 amplifier it is possible to override the Local Streaming
setting and free the device from the streaming group.
This device will
stream audio to
any Slave system
in the network
This device will
playback the
same audio
played by the
Master device
This device
will playback
audio from
local sources
or Internet
independently.
Master
Slave
Free
Kommander -KA02
User Guide
To Next Page
Loading...
