°C
°C
Fill water tank with fresh
potable water
Remove water tank. Re-insert water tank.
Press button briefly (0.5 sec.).Check operating voltage on
type plate.
Close lever completely. Place
a container under spout.
Press rinsing button to start
rinsing process.
Wait until rinsing process
has finished. Then empty the
container.
The appliance is ready for
operation.
On
max
3.5 l
°C
°C
°C
Please read the safety in-
structions before starting up
the appliance.
Before using the machine
for the first time, run 4 rins-
ing cycles. To do that, press
the rinsing button once the
previous rinsing process has
been completed.
If you decide to use a water
filter:
Screw filter into water tank
and rinse appliance with at
least 200 ml of water. Acti-
vate the "Filter available"
setting. Refer to "Parameter
setting: water filter" on page
48.
Start-up of the
appliance
Very hot water – risk of
scalding!
To Next Page
