Evaporation of
residual water
This function evaporates
and thus removes residual
water from inside the appli-
ance. This prevents residual
water from freezing inside
the appliance.
Risk of scalding! The
steam temperature can
reach up to 120 °C. Do not
reach under the spout. Keep
adequate distance from
spout.
Allow appliance to warm
up to room temperature if
necessary.
Re-insert the empty water
tank.
Dry front of appliance by
wiping with a cloth.
Open lever and close again. Press buttons (small and
extra large cup) for at least
3 sec.
Evaporation starts. Wait until evaporation is
finished (Eco mode).
°C
Remove and empty water
tank.
°C
°C
°C
°C
20°C
°C
To Next Page
