Preparing
beverages
°C
°C
°C
With upper drip tray. With lower drip tray.Adjust drip tray to desired
cup size.
Open the lever and insert
capsule.
Adjust height of spout, close
lever and choose cup size.
Brewing in progress.
Beverage dispensed.
Open lever, capsule falls into
container.
Press on/o button for at
least 3 sec.
O
3 s min.
BA
2 3
4
5 6
7
°C
°C
max
110 mm
°C
max
160 mm
°C
The spout can be
moved either down-
wards or upwards
with the help of the sliding
device (on both sides of the
spout)
.
Risk of scalding!
Do not open lever
during the brewing
process. Do not reach under
the spout. Very hot drink.
Stop the brewing pro-
cess by pressing any
button a second time.
For hygienic rea-
sons, rinse the ap-
pliance once after
each beverage pouring.
The appliance switch-
es off automatically if
it is unused for more
than 5 minutes. If necessary,
use the on/off button to re-
activate the machine before
preparing new drinks.
To Next Page
