K-FEE Grande - Setting Water Hardness Parameter; Water Hardness Levels; Setting Water Filter Parameter; Water Filter Availability Setting

22
8 11
EN
7
54
1 2
8
6
3
9
Press rinsing button for at
least 3 sec. in Eco mode.
Press button for at least
3sec. in Eco mode: no water
filter.
Press button briefly again:
water filter available.
Press button for at least
3sec. to store the setting.
Press rinsing button briefly
for soft water.
Press button briefly again for
medium hard water.
Press button briefly again for
hard water.
Press button briefly again
for very hard water (factory
setting).
Press rinsing button for at
least 3 sec. to store the set-
ting.
1
2
3
°C
°C
°C
°C
°C
°C
°C
°C
°C
Factory setting: no water fil-
ter
The water hardness set de-
termines how much water
is used before descaling be-
comes necessary. For an
overview for determining the
degree of water hardness,
see page 52.
Soft: 150 litres
Medium: 100 litres
Hard: 70 litres
Very hard: 40 litres
If the "Filter available" setting
has been activated, the water
hardness is automatically set
to soft water (150 l).
Parameter setting:
water filter
EN
Setting parame-
ters: water hard-
ness