Descaling on
request ( I )
Danger to health: Care-
fully read the user instruc-
tions of the descaler and
comply with the safety in-
structions.
If the descaling process is in-
terrupted, the appliance re-
turns to the descaling mode
automatically when switched
on again.
Before removing the drip
trays, make sure that the
spout is in the uppermost
position.
Filter has to be removed be-
fore descaling.
°C
The water hardness setting determines when the symbol for
descaling lights up in the display.
4
5
7
°C
8
Empty container and then re-
insert into the appliance.
Fill water tank with descaling
agent (100 ml) and 400 ml
water.
Insert water tank. Place a
container under spout.
Remove and empty water
tank.
Remove drip trays with spent
capsule container.
Open lever and close again.
6
3
2
°C
°C
°C
Only use descaling agents that are suitable
for the appliance. For further information,
please visit our website at:
www.k-fee-system.com
0.4 L
Press rinsing button for at
least 3 sec.
min.
0.6 l
To Next Page
Loading...
