Need help?Do you have a question about the K-Tech ET401A and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Caller ID | Yes |
| Call Waiting | Yes |
| Redial | Yes |
| Handset Volume Control | Yes |
| Ringer Volume Control | Yes |
| Type | Corded |
Essential steps before installing the speakerphone, including line verification.
List of tools needed for the installation process.
Details on the required analog touch-tone telephone line type, voltage, and loop current.
Instruction to connect the telephone line shield to true earth ground at one end only.
Step-by-step instructions for mounting the Sentry model.
Step-by-step instructions for mounting the Liberator model.
Instructions for cutting an opening and mounting the Fortress model.
Guide for aligning and mounting the Commander model to the COP.
How to configure the number of rings before the speakerphone answers an incoming call.
Steps for programming the unit directly using the built-in keypad.
Steps for programming the unit remotely via a touch-tone telephone.
Instructions on how to record and play Voice Announcement 1.
Procedure to disable or remove Voice Announcement 1 if not needed.
How to record a second voice announcement for additional information.
Guide to program up to five emergency phone numbers for auto-dialing.
Setting the duration the speakerphone remains active after a call.
Configuring the number of rings before dialing the next emergency number.
Setting a four-digit security code for programming changes.
Procedure for pressing the button and verifying call initiation and two-way communication.
How the call ends and how the answering party can call back.
Steps to diagnose issues when the unit shows no activity after button press.
Troubleshooting steps when dial tone is heard but numbers are not dialed.
Diagnosing problems related to the unit shutting off unexpectedly or cycling.
Identifying causes for the unit activating without user input, like elevator movement.
Electrical requirements, loop current, and protection against surges and polarity.
Details on dialing capabilities, voice announcement duration, and shut-off features.
Physical dimensions of different models and FCC registration information.
Key requirements for passing code, including mounting height and signage.
Information on FCC registration, RJ11C jack, and REN limits for line connection.
Device compliance with FCC Part 15 rules regarding interference.
Information on Industry Canada certification and connection requirements.
Explanation of REN and its meaning for terminal device connections.
Information on how to order products and contact customer service.
Terms and conditions of the product warranty and limitations.
Procedure for returning products for repair, including RA number requirements.
Fields for recording installation details and K-Tech contact information.
To Next Page