Voice Announcement 1 will automatically play when the emergency
call is answered. Once the 10 second message has played, two-
way communication is possible.
For best results, record the announcement in
. Speak clearly into the microphone or telephone
“There is an emergency in elevator 4 at 123 Main Street. Please
initiate entrapment procedures. Press star-one to repeat this
message.”
Activity Enter Voice Prompt
Record Voice
Announcement 1
* 1 "Press pound to start
recording"
Press " # " (pound); record
announcement with
speakerphone's built-in
microphone
#
Record
announce-
ment
(after 10 seconds) "Stop",
plays back recorded
message, then "Enter star
then program feature number"
Eliminating Voice Announcement 1
If you have another means in place to identify the origin of the
emergency call, you can eliminate Voice Announcement 1.
Activity Enter Voice Prompt
Eliminate Voice
Announcement 1
* 1 "Press pound to start
recording"
DO NOTHING
wait for unit to time out
(after 9 seconds) "Stop", then
"Enter star then program
feature number"
To Next Page
Loading...