K-Tech ET401A - Timer, Rings Outgoing, and Security; Setting Timer Minutes; Configuring Outgoing Rings; Setting Security Code

Page 15
Timer Minutes
This is the amount of time the K-Phone ET401 Emergency
Speakerphone will remain on (unless the called party extends the
timer).
Activity Enter Voice Prompt
Program Timer Minutes * 4 "Enter timer minutes"
Enter time desired from 01 to
99 minutes, or "0 0" for infinite
timer
0 5 "Zero five", beeps as number
is stored, then "Enter star
then Program Feature
number"
Number of Rings Outgoing
Sets the number of rings or “busy” signals the K-Phone ET401
Emergency Speakerphone will allow before dialing the next
Telephone Number.
Activity Enter Voice Prompt
Program Number of Rings
Outgoing
* 5 "Enter Number of Rings
Outgoing"
Enter number of rings desired
from 1 to 9
4 "Four", beeps as number is
stored, then "Enter star then
Program Feature number"
Security Code
This sets the Security Code for making changes to the
programming.
Activity Enter Voice Prompt
Program Security Code * 9 "Enter Security Code"
Enter new four-digit Security
Code
1 2 3 4 "One two three four", beeps
as number is stored, then
"Enter star then Program
Feature number"
Exit Program Mode
Activity Enter Voice Prompt
Exit Program Mode * # "Program complete"
NOTE: Be sure to set ONLINE/PROG switch to ONLINE.