K-Tech has taken great care in ensuring that our telephone
equipment meets all code requirements. There are however
additional requirements that have to be met in order for the
installation and operation to pass code. We will attempt to list
requirements pertaining to the installation of our telephone
equipment. The ultimate responsibility is yours, however. Consult
local codes to be sure your installation complies.
Telephone equipment must be mounted at the proper height for
people who use wheel chairs.
Make sure the called party knows how to make the visual
indicator function. This signal is for the hearing impaired and
means that help is on the way (see our “Answering Phone
Instructions” card).
Make sure the called party can determine the origin of the call
without interaction from the caller. This is accomplished by using
the Voice Announcement feature or by using a caller-ID system.
When installing K-Phone ET401s inside an elevator phone
cabinet you should install a sign with raised and Braille lettering
(such as model LB014) on the outside. A door handle allowing
the physically impaired to open the door (such as model ET-
TBH) should also be installed.
To Next Page
Loading...
General