K-Tech ET401A User Manual

Page 8
Liberator (ET401A-LP)
1.
Use the 3/32” Allen wrench (included) to unscrew the fasteners
and remove the rear enclosure.
2.
Using the rear enclosure as a template, mark the mounting
screw hole locations.
3.
Drill holes for two #8 screws (included).
4.
Mount the rear enclosure placing the Ground Lug under one of
these mounting screws.
WHEN LIGHT FLASHES
HELP IS ON THE WAY
K-Tech International, Inc, Torrington, CT
5.
Proceed to Settings on page 11.
6.
Proceed to Programming on page 12.
7.
Proceed to Operation and Testing on page 16.

K-Tech ET401A Specifications

General

Brand	K-Tech
Model	ET401A
Category	Telephone
Language	English