E
M
E
M
11
Reset Admin PIN Code
3-2
Delete All User Information
3-3
Open the battery cover
and press the [M]
button for 10 seconds.
Input a new 6~12-digit
PIN code and press #
to confirm.
Voice Guide:
“Please input PIN code.”
Caution
There is no voice guide if
[M] button is pressed less
than 10 seconds.
Important Notice: Admin
PIN code must be reset
with a unique admin PIN
code before programming!
DO NOT use the default
admin PIN code!
Voice Guide:
“Please input PIN code
again.”
Input the PIN code
again and press # to
confirm.
Open the battery cover
and press the [E]
button for 10 seconds.
Voice Guide:
“Please input PIN code.”
Input 6~12-digit admin
PIN code and press #
to confirm.
Voice Guide:
“Operation succeeded.”
Caution
All user information except
admin PIN code, wireless
relay and security
housekeeper will be
deleted after this
operation(Note: Wireless
Relay and Security
Housekeeper are not
available in some markets)
Remote control will not be
deleted when the wireless
communication is off.
There is no voice guide if
[E] button is pressed less
than 10 seconds.
Note
Must
To Next Page
Loading...
