1 General information
1.1 About this document
WARNING
Improper handling of the device can be hazardous!
1. You must read and understand the operating instructions in order to install and use the device safely!
Other applicable documents
During installation, observe all assembly and installation instructions for components and other parts of the system.
These instructions also apply to the equipment, related components and other parts of the system.
Some of the documents which are required to register your system and have it approved are included with the operating
instructions.
English translation of German original
This document has been produced in several languages. The German-language version is the original version. All other
language versions are translations of the original version.
This document is valid for the following types of device from firmware version V3.23 onwards
Modules [KACO art. no.] BLUEPLANET GS 92.0 TL3-S B1 WM OD IIGL [1001910]
BLUEPLANET GS 92.0 TL3-S B1 WM OD IIGX [1001911]
BLUEPLANET GS 92.0 TL3-S B1 WM OD IIGM [1001912]
1.2 More information
Links to more detailed information can be found at www.kaco-newenergy.com
Document title Document type
Technical data sheet Product flyer
Modbus protocol Application note (EN)
SunSpec Information Model Reference
SunSpec Information Model Reference KACO
Excel files for software version with application note “Mod-
bus protocol” under https://kaco-newenergy.com/down-
loads/
Software package Files for current software
EU Declaration of Conformity
Country-specific certificates
Certification for specific subassembly
Certificates
1.3 Layout of Instructions
1.3.1 Symbols used
General hazard Fire and risk of explosion
Electrical voltage Risk of burns
Earthing - ground conductor
1 | General information Manual
KACO blueplanet gridsave 92.0 TL3
Page 4
EN
To Next Page
Loading...
Need help?
General