Need help?Do you have a question about the KAESER ASK 28 and is the answer not in the manual?
General| Model | ASK 28 |
|---|---|
| Category | Rotary Screw Compressor |
| Motor Power | 15 kW |
| Sound Pressure Level | 68 dB(A) |
| Voltage | 400 V |
| Frequency | 50 Hz |
| Type | Stationary |
| Free Air Delivery (FAD) | 2.8 m³/min |
Explains warning notices indicating danger levels and consequences of non-compliance.
Details power supply requirements, cable sizes, and fusing.
Explains the heat recovery option (W2/W3) and its specifications.
Describes potential dangers and consequences of incorrect machine usage.
Outlines user obligations for safe operation and maintenance.
Ensures compliance with relevant safety and accident prevention regulations.
Specifies qualifications required for authorized operators and maintenance personnel.
Emphasizes adherence to inspection schedules and regulations.
Identifies various forms of danger during machine operation.
Provides guidance on handling electrical and compression dangers.
Information on safe handling of the machine throughout its lifecycle.
Measures to ensure safety through proper organization and communication.
Identifies areas dangerous to personnel and access restrictions.
Illustrates and explains safety signs and their meanings.
Provides guidance on handling emergency situations like fires.
Measures and extinguishing media for fire fighting.
Instructions for first aid in case of eye or skin contact with cooling oil.
Explains the internal workings and operational flow of the machine.
Details the safety devices provided and their function.
Overview of the SIGMA CONTROL 2 operating panel and its keys.
Explains machine operating modes and different control strategies.
Details control modes like DUAL, QUADRO, VARIO, and MODULATING.
Describes the heat recovery system and its operation.
Specifies conditions for machine installation.
Requirements for adequate ventilation of the machine room.
Guidelines for operating the machine within a compressed air network.
Safety instructions to follow during installation work.
Steps and precautions for connecting to the compressed air network.
Detailed steps for safely connecting the machine to the power supply.
Steps for connecting the heat recovery system.
Checklist and special measures for re-commissioning after storage.
Checklist for confirming installation and operating conditions before commissioning.
Step-by-step guide for the initial start-up of the machine.
Procedure for switching the machine on and off using the control panel.
Procedure for emergency shutdown and subsequent restart.
Categorization of error messages and general fault rectification guidelines.
Further common faults, their causes, and remedies.
Safety precautions to be observed during maintenance tasks.
Procedure for checking the functionality of the EMERGENCY STOP button.
Draining oil from the heat exchanger and filling with new cooling oil.
To Next Page
