2 Technical Specifications
2.1 Nameplate
The model designation and important technical information are given on the machine's nameplate.
The nameplate is located on the outside of the machine:
■ above the cooler, or
■ on the rear of the machine.
➤ Enter here the nameplate data as a reference:
Feature Value
Rotary screw compressor
Material no.
Serial no.
Year of manufacture
Rated power
Rated motor speed
Maximum working pressure
Ambient temperature
Tab. 3 Nameplate
2.2 Options
The table contains a list of possible options. The options for this machine are shown near the
nameplate.
➤ Enter options here as a reference:
Option Option code Provided?
MODULATINGcontrol C1
SIGMA CONTROL 2:
Connection to control technology available
C3 —
IT 3-phase supply C35 —
SIGMA CONTROL 2:
Connection to control technology not provided
C48 ✓
Bolt-down machine mounts H1
Air cooling K1 ✓
Transformer power supply for refrigeration dryer T2 —
Heat recovery ΔT=25 K W2
Heat recovery ΔT=55 K W3
Provided: ✓
not available: —
Tab. 4 Options
2 Technical Specifications
2.1 Nameplate
4
Operating Manual Screw Compressor
ASK 901824 12 E
To Next Page
Loading...
Need help?
General
