Need help?Do you have a question about the KAESER BSD 50 and is the answer not in the manual?
General| Model | BSD 50 |
|---|---|
| Category | Rotary Screw Compressor |
| Motor Power | 30 kW |
| Noise Level | 69 dB(A) |
| Drive Type | Direct |
Outlines basic requirements for the machine's electrical power supply.
Provides detailed specifications for power supply connections across different voltages.
Defines the intended industrial use of the machine and liabilities for incorrect use.
Details prohibited actions and misuse of the machine and compressed air.
Outlines user responsibilities regarding regulations, personnel, and inspections.
Identifies potential dangers related to electricity, pressure, noise, and materials.
Explains the meaning and location of various safety signs used on the machine.
Provides guidance on emergency procedures, including correct fire-fighting methods.
Explains the basic functional operation of the machine using an air-cooled example.
Explains the machine's operating modes and different control modes available.
Details the safety devices provided and stresses that they must not be modified.
Details requirements for machine placement, clearances, and ventilation.
Guidelines for connecting the compressor to a compressed air system.
Instructions for safely connecting the machine to the electrical power supply.
Safety precautions to be observed before and during machine commissioning.
Detailed steps for performing the initial start-up of the compressor.
Procedures for switching the machine on and off using the control panel keys.
How to use the emergency stop and restart the machine after an incident.
Procedures for acknowledging and resetting alarm and warning messages.
Lists alarm messages that cause the machine to stop, with possible causes and remedies.
Explains warning messages indicated by yellow LEDs, their causes, and remedies.
Covers faults that do not have specific indications, listing possible causes and remedies.
Mandatory safety instructions to be followed when performing maintenance work.
Details the schedule for logging, resetting, and performing regular maintenance tasks.
Detailed procedure for draining and changing the cooling oil from various components.
Step-by-step guide for replacing the oil filter.
Procedure for replacing the oil separator cartridge, which cannot be cleaned.
To Next Page
