3 Safety and Responsibility
3.1 Basic Information
The machine is manufactured to the latest engineering standards and acknowledged safety regula‐
tions. Nevertheless, dangers can arise through its operation:
■ Danger to life and limb of the operator or third parties.
■ Impairments to the machine and other material assets.
DANGER
Disregarding these instructions can result in serious injury.
➤ Read the service manual carefully and take notice of the contents for safe machine operation.
➤ Use this machine only if it is in a technically perfect condition and only for the purpose for which
it is intended; observe all safety measures and the instructions in the service manual.
➤ Immediately rectify (have rectified) any faults that could be detrimental to safety.
3.2 Specified use
The machine is intended solely for industrial use in generating compressed air. Any other use is
considered incorrect. The manufacturer is not liable for any damages that may result from incorrect
use. The user alone is liable for any risks incurred.
➤ Keep to the specifications listed in this service manual.
➤ Operate the machine only within its performance limits and under the permitted ambient condi‐
tions.
➤ Do not use compressed air for breathing purposes unless it is specifically treated.
➤ Do not use compressed for any application that will bring it into direct contact with food products
unless it is specifically treated.
3.3 Improper Use
➤ Never direct compressed air at persons or animals.
➤ Cooling air, warmed after passing through the machine, may be used for heating purposes but
only when it poses no health risk to humans or animals. If necessary, hot cooling air should be
treated by suitable means.
➤ Do not allow the machine to take in toxic, acidic, flammable or explosive gases or vapors.
➤ Do not operate the machine in areas in which specific requirements with regard to explosion
protection are applied.
3.4 User's Responsibilities
3.4.1 Observe statutory and universally accepted regulations
This is, for example, nationally applied European directives and/or valid national legislation, safety
and accident prevention regulations.
➤ Observe relevant statutory and accepted regulations during installation, operation and mainte‐
nance of the machine.
3 Safety and Responsibility
3.1 Basic Information
16
Service Manual Screw Compressor
BSD 9_5708 08 USE
To Next Page
Loading...
Need help?
General
