KAESER BSD 50 User Manual

Fig. 20 Switching on and off from a remote control center
1 «Remote control» key
2 Remote control LED
1. Attach an easily seen notice to the machine that warns of remote operation.
Remote control: danger of unexpected starting!
➤ Make sure the power supply disconnecting device is switched off before commencing any work
on the machine.
Tab. 42 Machine identification
2. Label the starting device in the remote control center as follows:
Remote control: danger of unexpected starting!
➤ Before starting, make sure that no one is working on the machine and that it can be safely started.
Tab. 43 Remote control identification
3. Press the «remote control» key.
The remote control LED lights. The machine can be remotely controlled.
8.4 Switching on and off with the clock
Precondition The clock is programmed.
8 Operation
8.4 Switching on and off with the clock
50
Service Manual Screw Compressor
BSD 9_5708 08 USE

KAESER BSD 50 Specifications

General

Model	BSD 50
Category	Rotary Screw Compressor
Motor Power	30 kW
Noise Level	69 dB(A)
Drive Type	Direct