CAUTION
Machine damage from moisture and frost.
➤ Prevent ingress of moisture and condensation.
➤ Maintain >32 °F storage temperature.
➤ Store the machine in a dry, frost-proof room.
12.4 Transporting
12.4.1 Safety
Weight and center of gravity determine the suitable transporting method. The center of gravity is
shown in the drawing in chapter 13.3.
Precondition Transport only by fork truck or lifting cradle and with personnel trained in the safe use of the transport
equipment.
➤ Make sure the danger zone is clear.
12.4.2 Transporting with a forklift
Precondition The whole machine must be over the forks.
Fig. 39 Transporting with a forklift
➤ Drive the forks completely under the machine or palette and lift carefully.
12.4.3 Transporting with a crane
A suitable lifting cradle ensures correct transportation.
The lifting slings must be fully under the machine.
The slings must not press on the side of the machine.
Examples of unsuitable fixing points:
■ Pipe supports
■ Flanges
■ Attached components such as centrifugal separators, condensate drains or filters
■ Rain protection covers
Precondition The lifting cradle complies with local safety regulations.
No pressure should bear on the sides of the machine cabinet.
12 Decommissioning, Storage and Transport
12.4 Transporting
9_5708 08 USE
Service Manual Screw Compressor
BSD
95
To Next Page
Loading...
Need help?
General
