KAESER BSD 50 User Manual

2 Technical Data
2.1 Nameplate
The model designation and important technical information are given on the machine's nameplate.
The nameplate is located on the outside of the machine:
■ above the cooler
or
■ on the rear of the machine.
➤ Enter data from the nameplate here as reference:
Characteristic Value
Model
Part no.
Year
Serial no.
psig
cfm
Voltage
Hz/RPM
Package FLA
Phase
HP
Wiring Diagram
FOR SERVICE, REFER TO EQUIPMENT NUMBER
Tab. 2 Nameplate
2.2 Options
The table contains a list of possible options.
➤ Enter options here as a reference.
Option Option code Available?
Modulating control C1
SIGMA CONTROL C3
Adjustable machine mountings H1
Air-cooling K1
Water cooling K2
Cooling-air filter mat K3
Transformer power supply for refrigeration dryer T2
Prepared for heat recovery W1
2 Technical Data
2.1 Nameplate
9_5708 08 USE
Service Manual Screw Compressor
BSD
3

KAESER BSD 50 Specifications

General

Model	BSD 50
Category	Rotary Screw Compressor
Motor Power	30 kW
Noise Level	69 dB(A)
Drive Type	Direct