KAESER BSD 50 User Manual

Option Option code Available?
Heat recovery ΔT=45 K W2
Heat recovery ΔT=55 K W3
Tab. 3 Options
2.3 Weight
The weight given is the maximum. Actual weights of individual machines are dependent on equipment
fitted.
BSD 40 BSD 50 BSD 60
Weight [lb] 2270 2350 2540
Tab. 4 Machine weight
2.4 Temperature
BSD 40 BSD 50 BSD 60
Minimum cut-in tempera‐
ture [°F]
40 40 40
Typical airend discharge
temperature during opera‐
tion [°F]
167–200 167–200 167–200
Maximum. airend dis‐
charge temp. (automatic
shut-down) [°F]
230 230 230
Tab. 5 Temperature
2.5 Ambient Conditions
BSD 40 BSD 50 BSD 60
Maximum elevation [ft.] 3000 3000 3000
Permissible ambient tem‐
perature [°F]
40–115 40–115 40–115
Cooling air temperature
[°F]
40–115 40–115 40–115
Inlet air temperature [°F] 40–115 40–115 40–115
Maximum relative humidi‐
ty of inlet air
see figure 1 see figure 1 see figure 1
* Higher elevation permissible only after consultation with the manufacturer
Tab. 6 Ambient Conditions
2 Technical Data
2.3 Weight
4
Service Manual Screw Compressor
BSD 9_5708 08 USE

KAESER BSD 50 Specifications

General

Model	BSD 50
Category	Rotary Screw Compressor
Motor Power	30 kW
Noise Level	69 dB(A)
Drive Type	Direct