➤ Switch off and lock out the power supply disconnecting device and check that no voltage is
present.
➤ Wear close-fitting clothes and a hair net if necessary.
➤ Make sure all covers and safety guards are in place and secured before starting.
Temperature
➤ Avoid contact with hot components.
These include, for example, compressor airends or blocks, oil and compressed air lines, coolers,
oil separator tanks, motors and machine heaters.
➤ Wear protective clothing.
➤ If welding is carried out on or near the machine, take adequate measures to prevent sparks or
heat from igniting oil vapors or parts of the machine.
Noise
➤ Operate the machine only with full soundproofing.
➤ Wear hearing protection if necessary.
The safety relief valve blowing off can be particularly loud.
Operating materials
➤ Strictly forbid fire, open flame and smoking.
➤ Follow safety regulations when dealing with lubricants and chemical substances.
➤ Avoid contact with skin and eyes.
➤ Do not inhale oil mist or vapor.
➤ Do not eat or drink while handling cooling and lubricating fluids.
➤ Keep suitable fire extinguishing agents ready for use.
➤ Use only KAESER approved operating materials.
Unsuitable spare parts
➤ Use only spare parts approved by the manufacturer for use in this machine.
Unsuitable spare parts compromise the safety of the device.
➤ Use only genuine KAESER pressure components.
Conversion or modification of the machine
➤ Do not permit conversion or modification of the machine as this can compromise function and
safe working.
Extension or modification of the compressed air system
➤ Extension or modification of the compressor station:
Check the blow-off capacity of safety relief valves on air receivers and compressed air lines before
installing any new machines.
➤ If the blow-off capacity is insufficient:
Install safety relief valves with larger blow-off capacity.
3 Safety and Responsibility
3.5 Dangers
9_5708 08 USE
Service Manual Screw Compressor
BSD
19
To Next Page
Loading...
Need help?
General
