Need help?Do you have a question about the KAESER Premium Compact W 200/4 and is the answer not in the manual?
Specifications of the compressor block, including type and performance data.
Factory-set and adjustable pressure switch settings for machine operation.
Maximum working pressure and pressure relief valve specifications.
Technical data for the drive motor, including power, speed, and protection rating.
Requirements and specifications for connecting the machine to the power supply.
Fundamental safety instructions for operating the machine safely.
Outlines user obligations regarding regulations, qualified personnel, and adherence to schedules.
Information on various dangers during machine operation, including electrical, pressure, and rotating parts.
Description of safety devices and guidelines for their use and maintenance.
Procedures for fire fighting and treating injuries from handling cooling oil.
Description of machine operating modes (LOAD/STANDSTILL) and control mechanisms.
Requirements for the installation site, including floor stability and environmental protection.
Safety instructions specific to the installation process of the machine.
Instructions and safety measures for connecting the machine to the electrical power supply.
Checklist and procedures before commissioning or re-commissioning the machine.
Verification of installation and operational conditions before the first start-up.
Steps for safely switching the machine on and off using the ON/OFF switch.
List of common alarms, their possible causes, and recommended remedies.
Critical safety measures to be followed before performing any maintenance work.
Recommended intervals and tasks for regular maintenance and service.
Procedure for checking the pressure relief valve and its function.
Specifications of the compressor block, including type and performance data.
Factory-set and adjustable pressure switch settings for machine operation.
Maximum working pressure and pressure relief valve specifications.
Technical data for the drive motor, including power, speed, and protection rating.
Requirements and specifications for connecting the machine to the power supply.
Fundamental safety instructions for operating the machine safely.
Outlines user obligations regarding regulations, qualified personnel, and adherence to schedules.
Information on various dangers during machine operation, including electrical, pressure, and rotating parts.
Description of safety devices and guidelines for their use and maintenance.
Procedures for fire fighting and treating injuries from handling cooling oil.
Description of machine operating modes (LOAD/STANDSTILL) and control mechanisms.
Requirements for the installation site, including floor stability and environmental protection.
Safety instructions specific to the installation process of the machine.
Instructions and safety measures for connecting the machine to the electrical power supply.
Checklist and procedures before commissioning or re-commissioning the machine.
Verification of installation and operational conditions before the first start-up.
Steps for safely switching the machine on and off using the ON/OFF switch.
List of common alarms, their possible causes, and recommended remedies.
Critical safety measures to be followed before performing any maintenance work.
Recommended intervals and tasks for regular maintenance and service.
Procedure for checking the pressure relief valve and its function.
General| Model | Premium Compact W 200/4 |
|---|---|
| Max Pressure | 10 bar |
| Voltage | 400 V |
| Noise level | 72 dB(A) |
| Flow Rate | 1.05 m³/min |
| Tank capacity | 200 liters |
To Next Page