KAESER TF 171E User Manual

REFRIGERATED
TYPE
COMPRESSED
AIR DRYERS
SERVICE DEPARTMENT: (724) 745-3038
CONTENTS
GENERAL SAFETY INFORMATION .................................. 2
RECEIVING, MOVING, AND UNPACKING ........................ 2
1.0 INSTALLATION ......................................................... 3
2.0 OPERATION ............................................................ 5
3.0 MAINTENANCE ...................................................... 8
SIZING ............................................................................ 8
ENGINEERING DATA ...................................................... 9
WIRING DIAGRAM
Model TF 171E .......................................................... 10-11
Model TF 210E .......................................................... 12-13
575-460/3/60 Transformer Pack ............................. 14
DIMENSIONS / WEIGHTS ................................................ 15
TROUBLESHOOTING GUIDE ............................................ 16
PARTS LIST ..................................................................... 17
WARRANTY ................................................................... 20
INSTRUCTION MANUAL
Demand Manager Control Series
Models: TF 171E & TF 210E
5002736 Rev. C 12/13

KAESER TF 171E Specifications

General

Brand	KAESER
Model	TF 171E
Category	Dehumidifier
Language	English

Summary

General Safety Information

Pressurized Devices

Safety regarding pressure limits.

Electrical Safety

Electrical installation and service safety precautions.

Breathing Air Quality

Considerations for air quality suitable for breathing.

Receiving, Moving, and Unpacking

Receiving Procedures

Inspecting shipments for visible damage upon delivery.

Unpacking and Damage Check

Inspecting for concealed damage after unpacking.

Moving and Transport

Guidelines for safely moving the equipment.

Storage and Shutdown Precautions

Proper storage and shutdown procedures to prevent damage.

1.0 Installation

1.1 Location Requirements

Guidelines for selecting an appropriate installation site.

Installation Details

1.2 Mounting

Instructions for securely mounting the dryer.

1.3 Piping Connections

How to connect air and water lines to the dryer.

1.4 Electrical Connections

Procedures for making electrical connections to the unit.

1.5 Moisture Separator

Information on the moisture separator and its drain.

1.6 Operation Startup

Initial steps to start the dryer's operation.

2.0 Operation

2.1 Minimum/Maximum Operating Conditions

Specifies the operational limits for air pressure and temperature.

2.2 Start-up Procedures

Step-by-step guide for starting the dryer and its compressor.

Operation Settings and Controls

Setting Date & Time

How to configure the date and time settings.

Setting Schedule

Configuring automated on/off schedules for the dryer.

Hours To Service

Setting service reminders based on operating hours.

Manual Operation

Instructions for manually controlling the refrigeration system.

Operating Check Points

Key checks to perform during dryer operation.

Interface and Communication

Interface Panel Check

Verifying information on the dryer's control panel.

RS-232 Port Usage

Guidelines for connecting and using the RS-232 port for monitoring.

3.0 Maintenance

Condenser Coil Cleaning

Routine cleaning of the condenser coil.

Moisture Separator Maintenance

Procedures for maintaining the moisture separator.

Drain Mechanism Maintenance

Annual rebuilding of the drain mechanism.

Troubleshooting Guide

Water Downstream

Troubleshooting steps for water in downstream pipelines.

High Pressure Drop

Diagnosing and resolving high pressure drop issues.

Checkpoint Faults

Addressing faults indicated by panel lights and display.

Low Pressure Faults

Troubleshooting low pressure conditions and alarms.

High Pressure Faults

Addressing high pressure conditions and manual reset requirements.

High Temperature Faults

Troubleshooting issues related to high air temperature.

Drain Faults

Diagnosing and fixing problems with the condensate drain.

Compressor Faults

Identifying and resolving compressor-related issues.

Heater Faults

Troubleshooting problems with the unit's heater.

Temp Sensor Faults

Diagnosing issues with the temperature sensor.