Kaiser Baas X90 - Camera Setup and Power; Powering On the Camera; Inserting Micro SD Card; Powering Off the Camera

Hold Three Seconds
Camera Status Indicator
Record Button
10
EN
X90 | User Guide
Set up your X90 Camera
To Power On
Press and Hold the Power button for a three seconds.
The camera status light (blue) will glow and the startup logo will
appear on the screen. When the live view is up on the X90 screen,
your camera is on and it is in Video Mode.
Insert a Micro SD Card
(A Class-6 or Class-10 Micro SD Card up to 32GB is recommended).
Press the Record Button to start recording video.
To Power O
Press and Hold the Power button for a few seconds.
KB13049 X90 Action Camera_9.06.16_trlingual.indd 10 10/06/2016 5:14 PM