Saving and Viewing Options
Transferring files to a PC
• Use the supplied the Micro USB cable to connect the X90 to the
USB port of your computer.
• Select Mass Storage Mode, press the Record button.
• Computer will detect the X90 as a Removable Storage Device.
Alternatively, you can remove the Micro SD card and use a card
reader (not included) to achieve the same result.
• Go to the SD card drive, select the file(s) you want to transfer to
your computer by highlighting them.
• Either drag the files to the desired location on your computer
(this will make a copy of the file) OR right-click the file, select
Copy and right-click in the desired location on your computer
and select Paste.
Tip: You can also transfer entire folders to your computer
To Next Page
Loading...
