What to do if info code REVERSE flashes on Kamstrup flowIQ 2101 Measuring Instruments?
If the info code REVERSE is flashing, it means the meter is installed with water flowing in the wrong direction. Remount the meter following the flow arrow located on the side of the meter case.
Why does info code DRY flash on Kamstrup flowIQ 2101?
The info code DRY flashes because the meter is not water-filled. To resolve this, air the installation. The info code will disappear once the meter is filled with water.
Why does info code RADIO OFF flash on Kamstrup flowIQ 2101 Measuring Instruments?
The info code RADIO OFF flashes because the meter is still in transport mode with the built-in radio transmitter turned off. This info code disappears, and the radio switches on, after the first ½ liter of water has run through the meter.
How to fix no display function (empty display) on Kamstrup Measuring Instruments?
If there is no display function (empty display), it means the battery needs to be replaced. Send the meter to Kamstrup A/S for a battery replacement.
General| Type | Ultrasonic water meter |
|---|---|
| Protection Class | IP68 |
| Application | Residential and commercial water metering |
| Measurement principle | Ultrasonic |
| Pressure rating | 16 bar |
| Temperature range | 0 to 90 °C |
| Communication | Wireless M-Bus |
| Power supply | Battery |
| Battery Life | Up to 10 years |
| Material | Brass |
| Diameter range | DN15 - DN40 |
Details the physical specifications of the water meter, including dimensions and materials.
Details the electrical specifications, such as battery type and lifetime.
Overview of different water meter variants and their specifications.
Specific water meter types and their parameters for South Africa.
Specific water meter types and their parameters for Australia.
Defines the permissible error ranges for meter measurements.
Configuration parameters for MULTICAL® 21 and flowIQ® 2101/2102 meters.
Configuration parameters for flowIQ® 2103 meters.
Essential prerequisites and guidelines for installing the water meter.
Specific conditions and requirements for meter installation.
Details environmental and system pressure limits for operation.
Describes the different methods for reading meter data.
Describes how information is presented on the meter's display.
Explains the meaning and display of various meter status codes.
Describes the symbol indicating meter adjustments and legal changes.
Details the wireless communication capabilities of the meter.
Details the different operational modes of the water meter.
Procedures for managing legal changes without breaking meter seals.
Process for adjusting the meter's flow curve after factory verification.
Procedure for re-adjusting the meter without breaking the legal seal.
Procedure for resetting the meter, typically for re-verification.
Provides step-by-step instructions for connecting the pulse adapter.
Explains how to connect the pulse interface to the meter.
Details on data transmission intervals, power, and update frequency.
To Next Page