What to do if info code REVERSE flashes on Kamstrup Measuring Instruments?
If the info code REVERSE is flashing, it means the meter is installed with water flowing in the wrong direction. Remount the meter following the flow arrow located on the side of the meter case.
Why does info code DRY flash on Kamstrup MULTICAL 21?
The info code DRY flashes because the meter is not water-filled. To resolve this, air the installation. The info code will disappear once the meter is filled with water.
Why does info code RADIO OFF flash on Kamstrup MULTICAL 21?
The info code RADIO OFF flashes because the meter is still in transport mode with the built-in radio transmitter turned off. This info code disappears, and the radio switches on, after the first ½ liter of water has run through the meter.
How to fix no display function (empty display) on Kamstrup MULTICAL 21 Measuring Instruments?
If there is no display function (empty display), it means the battery needs to be replaced. Send the meter to Kamstrup A/S for a battery replacement.
General| Measurement principle | Ultrasonic |
|---|---|
| Display | LCD |
| MID approval | Yes |
| Battery lifetime | 16 years |
| Protection class | IP68 |
| Pressure rating | PN16 |
| Communication | Wireless M-Bus |
| Power supply | Battery (Lithium) |
| Accuracy | Class 2 |
| Ambient temperature range | 5°C to 55°C |
Details different models, sizes, and flow rate specifications.
Explains permissible error ranges and accuracy classes.
Configuration parameters for specific meter models.
Configuration parameters for the flowIQ 2103 model.
Provides detailed physical specifications and weight information.
Essential conditions and steps for meter installation.
Specifies the required operating pressure range for the meter.
Explains how to read meter data via display, M-Bus, or optical eye.
Details how the meter calculates and displays water volume.
Details on the Wireless M-Bus protocol and data transmission.
Explains initial factory flow calibration and adjustments.
Details post-factory adjustments to the flow curve.
Describes how to reset meter parameters and logs.
Details the core ultrasonic technology used in the meter.
Describes the purpose and output of the pulse adapter unit.
Step-by-step guide for installing the pulse adapter.
Covers transmission intervals, power, and package updates.
To Next Page