TECHNICAL DESCRIPTION MULTICAL® 21 & flowIQ® 2101 /..02 /..03
66 Kamstrup A/S •Technical Description • 5512-897_J1_GB • 06.2016
16 Communication (KMP)
The meter has an optical communication interface on the front. The interface communicates at 1200 baud
and can be used if an optical reading head is connected to METERTOOL and LogView.
16.1 Optical eye activation
In order to limit current consumption the optical eye is usually, switched off. The meter's optical
communication is automatically, switched on 4 sec. after having placed the magnetic optical reading head
on the meter.
17 METERTOOL for MULTICAL® 21 / flowIQ® 2101 / ..02 / ..03
METERTOOL is a PC-program – giving access to change the customer selected parameters of a water meter
configuration and read its data memory without dismounting the meter from the installation.
Get further information and technical details on METERTOOL/LogView in the document:
5512-1653_GB ’Technical Description for METERTOOL & LogView ’
To Next Page
Loading...
Need help?
General
