Kamstrup MULTICAL 21 - Meter Configuration Options; Configuration for MULTICAL 21; flowIQ 2101; 2102

TECHNICAL DESCRIPTION MULTICAL® 21 & flowIQ® 2101 /..02 /..03
26 Kamstrup A/S •Technical Description • 5512-897_J1_GB • 06.2016
6 Configuration
6.1 Configuration - MULTICAL® 21 / flowIQ® 2101 / flowIQ® 2102
KK
LLL
MMM
N
P
R
S
T
□□
□□□
□□□
□
□
□
□
□
Target date (fixed)
01
Average time of max values
2 minutes
002
Customer label 2005-MMM
MMM
Leakage message limit
OFF
0
Flow continuously > 0,5% of Q3
1
Flow continuously > 1,0% of Q3
2
Flow continuously > 2,0% of Q3
3
Flow continuously > 0,25% of Q3
4
Flow continuously > 0,1% of Q3
5
Pipe burst limit
OFF
0
Flow > 5 % of Q3 for 30 minutes
1
Flow > 10 % of Q3 for 30 minutes
2
Flow > 20 % of Q3 for 30 minutes
3
Optional register in data logger
* Reccommended for ’Drive-by’ ** Reccommended for ’Fixed network’
Monthly target volume
1
Max flow during last month
2
Monthly target volume/Min.temp.water, daily/Time weighted average temp. meter, daily
**
3
Monthly max flow/Average temp.water, daily/Time weighted aver. temp. meter, daily
**
4
Monthly target volume / Min. water temp. monthly / Min. temp. meter, latest month
*
5
Monthly target volume/Min. water temp., monthly/Max temp. meter, latest month
*
7
Daily max flow / Min.temp.water, daily / Time weighted average temp. meter, daily
**
9
Display resolution
00001 m³
0
00000.1 m³
1
00000.01 m³
2
00000.001 m³
3
Encryption level
No encryption
0
Utility encryption (only available for selected markets)
2
Encryption with separately forwarded key
3
Unless otherwise stated in the order,
Kamstrup supplies the following:
01
002
000
1
3
5
3
3