MULTICAL® 21 & flowIQ® 2101 /..02 /..03 TECHNICAL DESCRIPTION
Kamstrup A/S •Technical Description • 5512-897_J1_GB • 06.2016 39
10.6 Optional register in data logger
Some of the data sent via the Wireless M-Bus radio is optional. It is possible to select one of the data
packages with content illustrated in the figure below.
The choices are determined by means of the selected R-value when ordering a water meter – shown to the
right in the figure below.
Note! R-value 1 + 2 are not an option for flowIQ® 2103
See description of Wireless M-Bus signal in section ‘Wireless M-Bus’
*)
R-value ‘1’ and ‘2’ are not available for 2103
To Next Page
Loading...
Need help?
General
