Kamstrup OMNIPOWER User Manual

2 Kmstrup A/S • 55121312_E1_GB_09.2015
OMNIPOWER – single-phase
Installation manual
Connect the meter in ccordnce with the instlltion digrm on the meter’s type lbel.
Depending on the configurtion,  fixed vlue is displyed, or the disply chnges be-
tween selected indictions every 10 seconds.
It is possible to chnge the disply reding mnully by ctivting the push button on the
meter. The vilble redings depend on the meter’s configurtion.
Security and installation guidelines
The meter is only to be used for mesuring electricl energy nd shll operte within the
specified vlues only.
The meter must be disconnected when working on it. It cn be highly dngerous to touch
the meter prts when the meter is switched on.
Therefore, the relevnt security fuse must be removed nd kept in  plce where it cn-
not be inserted by unuthorized persons.
Current locl stndrds, guidelines, regultions nd instructions must be observed. Only
uthorized personnel is permitted to instll electricity meters.
Meters for direct connection must be protected ginst short circuit by  security fuse in
ccordnce with the mximum current stted on the meter.
Filing to obey the ”Guidelines for sfety nd instlltion”, the gurntee no longer p-
plies.

Kamstrup OMNIPOWER Specifications

General

Brand	Kamstrup
Model	OMNIPOWER
Category	Measuring Instruments
Language	English