Kane 456 - Page 22

Page 22
ROOM
CO
→
LOG
01
→
TEST
3
→
CO
0p
→
PASS
→
PRINT

→
With no LEDs flashing
Use the / keys to move the lit LEDs to the line you want.
You can change the LOG number and the TEST number so that you can view
individual test results.
Press / to select the line you want and the LEDs will start to flash.
Now use the / keys to change the number (the TEST number or the LOG
number)
Press / when you are happy with the changes. The LEDs will stop
flashing. Now use the
/ keys to move the LEDs to the PRINT line.
Sending to the printer or wireless device will only occur when you move the LEDs to
the print line and press / .
Press / to print the test, (or send to PC via optional Wireless module).