KanexPro EXT-HDBTKVM100 - 1 Introduction; Introduction to EXT-HDBTKVM100; Features; Packing List

HDBaseT 2.0 KVM Extender Set
1
1. Introduction
1.1 Introduction to EXT-HDBTKVM100
Compliant with HDMI 2.0 & HDCP 2.2, The KanexPro EXT-HDBTKVM100 is a 4K
HDMI Extender set developed with the latest HDBaseT™ 2.0 technology to extend
uncompressed HDMI video, audio, USB 2.0, control signals and PoH over a single
CAT5e/6 cable. The PoH compliant extender comes with only one power supply, which
means that, it can be powered bi-directionally from Tx to Rx or vice versa to save
installers time and added cost to installing a power outlet. Ideally designed for smart
displays and KVM solutions fitting digital signage markets.
Features
! Compatible with HDMI2.0, delivers high-resolution AV signal (1080p 3D,
4Kx2K@60Hz), support older compatibility (e.g. HDMI 1.4)
! Supports HDBaseT 2.0, transmit 4Kx2K signal up to 100m and 1080p signal up to
150m over single CAT5e/CAT6 cable
! EDID Pass-Thru
! HDCP2.2 compliant
! Supports CEC
! Front panel status LEDs for power, link & HDCP
! Transmission mode (100m/150m) can be switched via intuitive front panel switcher
! Bi-directional USB & RS232 control
! Bi-directional PoH (Power over HDBaseT)
1.2 Packing List
" 1 x Transmitter (EXT-HDBTKVM100T)
" 1 x Receiver (EXT-HDBTKVM100R)
" 4 x Detachable Mounting Ears
" 8 x Screws
" 1 x Power Adapter (DC 12V 2A)
" 8 x Plastic Cushions
" 2 x RS232 cables (Phoenix to 9 Pin
D-Sub)
" 1 x User manual
# Please confirm if the product and the accessories are all included, if not, please
contact your dealer or support@kanexpro.com