Kanguru KCLONE-4NVME - System and Language Settings; Network Configuration

18
6.6 Advanced Settings
• System Time - Set the current date and time and then tap the Save button.
• Logs
○ Save - Enable to allow system logs to be saved in the duplicator’s flash memory.
○ Dupm to USB0 - Tap to save the system logs to a USB flash drive connected to the duplicator’s
USB port.
• Update - Update the firmare on your duplicator.
• Touch Screen - Tap to adjust touch screen calibration. Refer to section 2.3 Calibrating the
Touchscreen on page 8.
• Langage - The duplicator supports English and Chinese language. Default: English
• Mute - Turn the duplicator sound on and off. Disabled by default.
• Proc Music - Turn the music that plahys while the duplicator is working on and off. Enabled by
default.
6.7 Network Settings
Network settings must be configured if you are using the Maxi PC software to access the Duplicator
over a LAN. For more information about using the duplicator’s network capabilities, refer to chapter
The default Machine ID is “MX4NVM-1” and can be changed to allow for multiple KanguruClone
duplicators to appear on the same network.
If “Enable Server Control” is enabled, a host PC running the Maxi software on the same LAN as the
KanguruClone will be able to connect to the duplicator.
Settings