Kanguru KCLONE-4NVME - Restore Image to Devices

23
7.2.9 Restore Image to Client Source Devices
Restore or load an image file saved on the host PC to a Master drive connected to the KanguruClone’s
Source port.
1. On the KanguruClone, assign the Source position and connect a Master drive to the Source port.
2. In Maxi, under the Machine tab Summary, click on the source port where the Master drive is
connected to select it.
3. Click on Restore Image to all Client Source Devices .
4. Select how you want to transfer the image file to the Master drive:
○ Save - copy the image file from the host to the drive connected to the Source position.
○ Save All - restore the image file, expanding and writing the contents to the drive connected
to the Source position.
Network Access